Power outages, voltage fluctuations, surges, spikes, and other power quality problems can cause serious damage to your critical equipment and data. Whether you are running a server, a network device, or an industrial machine, you need a reliable and efficient uninterruptible power supply (UPS) to protect your operations from downtime, data loss, and corruption.
That’s why you should consider the Eaton UPS DX series, a range of online double-conversion UPS models that offer advanced power protection for various applications and environments. The Eaton UPS DX series can adapt to a wide range of input voltages, isolate the output power from all input anomalies, and provide backup power and voltage regulation in case of power failure or fluctuation.
The Eaton UPS DX series consists of four models: DX1000CN, DX2000CN, DX3000CN, and DX6000CN. They have rated capacities of 1KVA/900W, 2KVA/1800W, 3KVA/2700W, and 6KVA/5400W respectively. They also have different features and benefits to suit different needs and budgets.
Here are some of the key features and benefits of the Eaton UPS DX series:
- Online double-conversion topology: This topology guarantees a consistently high level of power quality by converting the input AC power to DC power and then back to AC power. This process eliminates any disturbances on the input waveform and provides a pure sine wave output. The battery is used only as a backup source in case of power outage.
- Wide input voltage range: The Eaton UPS DX series can handle a wide range of input voltages from 110 to 296 VAC (low voltage models) or 176 to 276 VAC (high voltage models). This feature allows the UPS to avoid battery usage during minor power fluctuations and save its capacity for times when utility power is completely lost.
- Standard and XL models: The Eaton UPS DX series offers standard models with internal batteries that can provide runtime up to 15 minutes depending on the load level. It also offers XL models with external battery cabinets that can provide customized and longer runtime according to your requirements. The XL models also have a fast recharging feature that can reduce the battery recharge time by up to 50%.
- User-friendly LCD display: The Eaton UPS DX series has a user-friendly LCD display that shows important information such as input and output voltage, load level, battery status, fault codes, etc. The LCD display also allows you to configure various settings and parameters of the UPS such as output voltage, frequency, bypass mode, etc.
- Intelligent battery management: The Eaton UPS DX series has an intelligent battery management system that can automatically adjust the charger parameters based on the environmental and load conditions. This feature can extend the battery service life and minimize the time required to recharge. The UPS also has various optimized modes for different types of batteries such as sealed lead-acid (SLA), valve-regulated lead-acid (VRLA), lithium-ion (Li-ion), etc.
- Communication and management: The Eaton UPS DX series has an RS232 port and an optional SNMP card for communication and management. You can use these ports to connect the UPS to your server or network device and monitor its status and performance remotely. You can also use the WINPOWER software that comes with the UPS to control and manage multiple UPS units from a single interface.
- High performance and reliability: The Eaton UPS DX series uses high-frequency technology to deliver high efficiency and low noise levels. It also has a built-in automatic bypass switch that can transfer the load to utility power in case of overload or fault. It also has a cold start feature that allows you to start the UPS on battery power without utility power.
The Eaton UPS DX series is one of the best online double-conversion UPS models in the market that can provide reliable and efficient power protection for your critical applications. You can find more information about the Eaton UPS DX series on the official website:www.ycaut.com for pricing and availability.